diff --git a/private_dot_config/i3/bar b/private_dot_config/i3/bar
deleted file mode 100644
index e695bf8..0000000
--- a/private_dot_config/i3/bar
+++ /dev/null
@@ -1,24 +0,0 @@
-# font used by i3 for titles and bars
-font pango:Hack 8
-
-#start of bar section
-bar {
-    position top
-    status_command i3blocks -c ~/.config/i3/i3blocks.conf
-    colors {
-        # bar background color
-        background $bg
-        # text color used for blocks that do not have a color specified.
-        statusline $yellow
-        # workspaces section            
-        #                    border  backgr. text
-        focused_workspace    $aqua $green $black
-        inactive_workspace   $darkgray $black $orange
-        active_workspace     $darkgray $black $orange
-        urgent_workspace     $red $red $bg
-    }
-}
-#end of bar section
-
-#start of window title bars & borders section
-
diff --git a/private_dot_config/i3/config.save b/private_dot_config/i3/config.save
deleted file mode 100644
index b25b05e..0000000
--- a/private_dot_config/i3/config.save
+++ /dev/null
@@ -1,182 +0,0 @@
-# This file has been auto-generated by i3-config-wizard(1).
-# It will not be overwritten, so edit it as you like.
-#
-# Should you change your keyboard layout some time, delete
-# this file and re-run i3-config-wizard(1).
-#
-
-# i3 config file (v4)
-#
-# Please see https://i3wm.org/docs/userguide.html for a complete reference!
-
-set $mod Mod4
-
-# Font for window titles. Will also be used by the bar unless a different font
-# is used in the bar {} block below.
-font pango:monospace 8
-
-# This font is widely installed, provides lots of unicode glyphs, right-to-left
-# text rendering and scalability on retina/hidpi displays (thanks to pango).
-#font pango:DejaVu Sans Mono 8
-
-# The combination of xss-lock, nm-applet and pactl is a popular choice, so
-# they are included here as an example. Modify as you see fit.
-
-# xss-lock grabs a logind suspend inhibit lock and will use i3lock to lock the
-# screen before suspend. Use loginctl lock-session to lock your screen.
-exec --no-startup-id xss-lock --transfer-sleep-lock -- i3lock --nofork
-
-# NetworkManager is the most popular way to manage wireless networks on Linux,
-# and nm-applet is a desktop environment-independent system tray GUI for it.
-exec --no-startup-id nm-applet
-
-# Use pactl to adjust volume in PulseAudio.
-set $refresh_i3status killall -SIGUSR1 i3status
-bindsym XF86AudioRaiseVolume exec --no-startup-id pactl set-sink-volume @DEFAULT_SINK@ +10% && $refresh_i3status
-bindsym XF86AudioLowerVolume exec --no-startup-id pactl set-sink-volume @DEFAULT_SINK@ -10% && $refresh_i3status
-bindsym XF86AudioMute exec --no-startup-id pactl set-sink-mute @DEFAULT_SINK@ toggle && $refresh_i3status
-bindsym XF86AudioMicMute exec --no-startup-id pactl set-source-mute @DEFAULT_SOURCE@ toggle && $refresh_i3status
-
-# Use Mouse+$mod to drag floating windows to their wanted position
-floating_modifier $mod
-
-# start a terminal
-bindsym $mod+Return exec i3-sensible-terminal
-
-# kill focused window
-bindsym $mod+Shift+q kill
-
-# start dmenu (a program launcher)
-bindsym $mod+d exec --no-startup-id dmenu_run
-# A more modern dmenu replacement is rofi:
-# bindcode $mod+40 exec rofi -modi drun,run -show drun
-# There also is i3-dmenu-desktop which only displays applications shipping a
-# .desktop file. It is a wrapper around dmenu, so you need that installed.
-bindsym $mod+d exec --no-startup-id i3-dmenu-desktop
-
-# change focus
-bindsym $mod+j focus left
-bindsym $mod+k focus down
-bindsym $mod+l focus up
-bindsym $mod+semicolon focus right
-
-# alternatively, you can use the cursor keys:
-bindsym $mod+Left focus left
-bindsym $mod+Down focus down
-bindsym $mod+Up focus up
-bindsym $mod+Right focus right
-
-# move focused window
-bindsym $mod+Shift+j move left
-bindsym $mod+Shift+k move down
-bindsym $mod+Shift+l move up
-bindsym $mod+Shift+semicolon move right
-
-# alternatively, you can use the cursor keys:
-bindsym $mod+Shift+Left move left
-bindsym $mod+Shift+Down move down
-bindsym $mod+Shift+Up move up
-bindsym $mod+Shift+Right move right
-
-# split in horizontal orientation
-bindsym $mod+h split h
-
-# split in vertical orientation
-bindsym $mod+v split v
-
-# enter fullscreen mode for the focused container
-bindsym $mod+f fullscreen toggle
-
-# change container layout (stacked, tabbed, toggle split)
-bindsym $mod+s layout stacking
-bindsym $mod+w layout tabbed
-bindsym $mod+e layout toggle split
-
-# toggle tiling / floating
-bindsym $mod+Shift+space floating toggle
-
-# change focus between tiling / floating windows
-bindsym $mod+space focus mode_toggle
-
-# focus the parent container
-bindsym $mod+a focus parent
-
-# focus the child container
-#bindsym $mod+d focus child
-
-# Define names for default workspaces for which we configure key bindings later on.
-# We use variables to avoid repeating the names in multiple places.
-set $ws1 "1"
-set $ws2 "2"
-set $ws3 "3"
-set $ws4 "4"
-set $ws5 "5"
-set $ws6 "6"
-set $ws7 "7"
-set $ws8 "8"
-set $ws9 "9"
-set $ws10 "10"
-
-# switch to workspace
-bindsym $mod+1 workspace number $ws1
-bindsym $mod+2 workspace number $ws2
-bindsym $mod+3 workspace number $ws3
-bindsym $mod+4 workspace number $ws4
-bindsym $mod+5 workspace number $ws5
-bindsym $mod+6 workspace number $ws6
-bindsym $mod+7 workspace number $ws7
-bindsym $mod+8 workspace number $ws8
-bindsym $mod+9 workspace number $ws9
-bindsym $mod+0 workspace number $ws10
-
-# move focused container to workspace
-bindsym $mod+Shift+1 move container to workspace number $ws1
-bindsym $mod+Shift+2 move container to workspace number $ws2
-bindsym $mod+Shift+3 move container to workspace number $ws3
-bindsym $mod+Shift+4 move container to workspace number $ws4
-bindsym $mod+Shift+5 move container to workspace number $ws5
-bindsym $mod+Shift+6 move container to workspace number $ws6
-bindsym $mod+Shift+7 move container to workspace number $ws7
-bindsym $mod+Shift+8 move container to workspace number $ws8
-bindsym $mod+Shift+9 move container to workspace number $ws9
-bindsym $mod+Shift+0 move container to workspace number $ws10
-
-# reload the configuration file
-bindsym $mod+Shift+c reload
-# restart i3 inplace (preserves your layout/session, can be used to upgrade i3)
-bindsym $mod+Shift+r restart
-# exit i3 (logs you out of your X session)
-bindsym $mod+Shift+e exec "i3-nagbar -t warning -m 'You pressed the exit shortcut. Do you really want to exit i3? This will end your X session.' -B 'Yes, exit i3' 'i3-msg exit'"
-
-# resize window (you can also use the mouse for that)
-mode "resize" {
-        # These bindings trigger as soon as you enter the resize mode
-
-        # Pressing left will shrink the window’s width.
-        # Pressing right will grow the window’s width.
-        # Pressing up will shrink the window’s height.
-        # Pressing down will grow the window’s height.
-        bindsym j resize shrink width 10 px or 10 ppt
-        bindsym k resize grow height 10 px or 10 ppt
-        bindsym l resize shrink height 10 px or 10 ppt
-        bindsym semicolon resize grow width 10 px or 10 ppt
-
-        # same bindings, but for the arrow keys
-        bindsym Left resize shrink width 10 px or 10 ppt
-        bindsym Down resize grow height 10 px or 10 ppt
-        bindsym Up resize shrink height 10 px or 10 ppt
-        bindsym Right resize grow width 10 px or 10 ppt
-
-        # back to normal: Enter or Escape or $mod+r
-        bindsym Return mode "default"
-        bindsym Escape mode "default"
-        bindsym $mod+r mode "default"
-}
-
-bindsym $mod+r mode "resize"
-
-# Start i3bar to display a workspace bar (plus the system information i3status
-# finds out, if available)
-bar {
-        status_command i3status
-}
diff --git a/private_dot_config/i3/config.save.1 b/private_dot_config/i3/config.save.1
deleted file mode 100644
index 06e81cd..0000000
--- a/private_dot_config/i3/config.save.1
+++ /dev/null
@@ -1,224 +0,0 @@
-# This file has been auto-generated by i3-config-wizard(1).
-# It will not be overwritten, so edit it as you like.
-#
-# Should you change your keyboard layout some time, delete
-# this file and re-run i3-config-wizard(1).
-#
-
-# i3 config file (v4)
-#
-# Please see https://i3wm.org/docs/userguide.html for a complete reference!
-
-set $mod Mod1
-
-# Font for window titles. Will also be used by the bar unless a different font
-# is used in the bar {} block below.
-#font pango:monospace 8
-
-# This font is widely installed, provides lots of unicode glyphs, right-to-left
-# text rendering and scalability on retina/hidpi displays (thanks to pango).
-font pango:DejaVu Sans Mono 8
-
-# The combination of xss-lock, nm-applet and pactl is a popular choice, so
-# they are included here as an example. Modify as you see fit.
-
-# xss-lock grabs a logind suspend inhibit lock and will use i3lock to lock the
-# screen before suspend. Use loginctl lock-session to lock your screen.
-exec --no-startup-id xss-lock --transfer-sleep-lock -- i3lock --nofork
-
-# NetworkManager is the most popular way to manage wireless networks on Linux,
-# and nm-applet is a desktop environment-independent system tray GUI for it.
-exec --no-startup-id nm-applet
-
-# Use pactl to adjust volume in PulseAudio.
-# set $refresh_i3status killall -SIGUSR1 i3status
-# bindsym XF86AudioRaiseVolume exec --no-startup-id pactl set-sink-volume @DEFAULT_SINK@ +10% && $refresh_i3status
-# bindsym XF86AudioLowerVolume exec --no-startup-id pactl set-sink-volume @DEFAULT_SINK@ -10% && $refresh_i3status
-# bindsym XF86AudioMute exec --no-startup-id pactl set-sink-mute @DEFAULT_SINK@ toggle && $refresh_i3status
-# bindsym XF86AudioMicMute exec --no-startup-id pactl set-source-mute @DEFAULT_SOURCE@ toggle && $refresh_i3status
-
-# Use Mouse+$mod to drag floating windows to their wanted position
-floating_modifier $mod
-
-# start a terminal
-bindsym $mod+Return exec alacritty
-
-# kill focused window
-bindsym $mod+f4 kill
-
-# start dmenu (a program launcher)
-bindsym $mod+d exec --no-startup-id rofi -show run 
-# A more modern dmenu replacement is rofi:
-# bindcode $mod+40 exec rofi -modi drun,run -show drun
-# There also is i3-dmenu-desktop which only displays applications shipping a
-# .desktop file. It is a wrapper around dmenu, so you need that installed.
-#bindsym $mod+d exec --no-startup-id i3-dmenu-desktop
-
-# change focus
-bindsym $mod+j focus left
-bindsym $mod+k focus down
-bindsym $mod+l focus up
-bindsym $mod+semicolon focus right
-
-# alternatively, you can use the cursor keys:
-bindsym $mod+Left focus left
-#bindsym $mod+Down focus down
-#bindsym $mod+Up focus up
-bindsym $mod+Right focus right
-
-# move focused window
-bindsym $mod+Shift+j move left
-bindsym $mod+Shift+k move down
-bindsym $mod+Shift+l move up
-bindsym $mod+Shift+semicolon move right
-
-# alternatively, you can use the cursor keys:
-bindsym $mod+Shift+Left move left
-bindsym $mod+Shift+Down move down
-bindsym $mod+Shift+Up move up
-bindsym $mod+Shift+Right move right
-
-# split in horizontal orientation
-bindsym $mod+h split h
-
-# split in vertical orientation
-bindsym $mod+v split v
-
-# enter fullscreen mode for the focused container
-bindsym $mod+f fullscreen toggle
-
-# change container layout (stacked, tabbed, toggle split)
-bindsym $mod+s layout stacking
-bindsym $mod+w layout tabbed
-bindsym $mod+e layout toggle split
-
-# toggle tiling / floating
-bindsym $mod+Shift+space floating toggle
-
-# change focus between tiling / floating windows
-bindsym $mod+space focus mode_toggle
-
-# focus the parent container
-bindsym $mod+a focus parent
-
-# focus the child container
-#bindsym $mod+d focus child
-
-# Define names for default workspaces for which we configure key bindings later on.
-# We use variables to avoid repeating the names in multiple places.
-set $ws1 "1"
-set $ws2 "2"
-set $ws3 "3"
-set $ws4 "4"
-set $ws5 "5"
-set $ws6 "6"
-set $ws7 "7"
-set $ws8 "8"
-set $ws9 "9"
-set $ws10 "10"
-
-# switch to workspace
-bindsym $mod+1 workspace number $ws1
-bindsym $mod+2 workspace number $ws2
-bindsym $mod+3 workspace number $ws3
-bindsym $mod+4 workspace number $ws4
-bindsym $mod+5 workspace number $ws5
-bindsym $mod+6 workspace number $ws6
-bindsym $mod+7 workspace number $ws7
-bindsym $mod+8 workspace number $ws8
-bindsym $mod+9 workspace number $ws9
-bindsym $mod+0 workspace number $ws10
-
-# move focused container to workspace
-bindsym $mod+Shift+1 move container to workspace number $ws1
-bindsym $mod+Shift+2 move container to workspace number $ws2
-bindsym $mod+Shift+3 move container to workspace number $ws3
-bindsym $mod+Shift+4 move container to workspace number $ws4
-bindsym $mod+Shift+5 move container to workspace number $ws5
-bindsym $mod+Shift+6 move container to workspace number $ws6
-bindsym $mod+Shift+7 move container to workspace number $ws7
-bindsym $mod+Shift+8 move container to workspace number $ws8
-bindsym $mod+Shift+9 move container to workspace number $ws9
-bindsym $mod+Shift+0 move container to workspace number $ws10
-
-# reload the configuration file
-bindsym $mod+Shift+c reload
-# restart i3 inplace (preserves your layout/session, can be used to upgrade i3)
-bindsym $mod+Shift+r restart
-# exit i3 (logs you out of your X session)
-bindsym $mod+Shift+e exec "i3-nagbar -t warning -m 'You pressed the exit shortcut. Do you really want to exit i3? This will end your X session.' -B 'Yes, exit i3' 'i3-msg exit'"
-
-# resize window (you can also use the mouse for that)
-mode "resize" {
-        # These bindings trigger as soon as you enter the resize mode
-
-        # Pressing left will shrink the window’s width.
-        # Pressing right will grow the window’s width.
-        # Pressing up will shrink the window’s height.
-        # Pressing down will grow the window’s height.
-        bindsym j resize shrink width 10 px or 10 ppt
-        bindsym k resize grow height 10 px or 10 ppt
-        bindsym l resize shrink height 10 px or 10 ppt
-        bindsym semicolon resize grow width 10 px or 10 ppt
-
-        # same bindings, but for the arrow keys
-        bindsym Left resize shrink width 10 px or 10 ppt
-        bindsym Down resize grow height 10 px or 10 ppt
-        bindsym Up resize shrink height 10 px or 10 ppt
-        bindsym Right resize grow width 10 px or 10 ppt
-
-        # back to normal: Enter or Escape or $mod+r
-        bindsym Return mode "default"
-        bindsym Escape mode "default"
-        bindsym $mod+r mode "default"
-}
-
-bindsym $mod+r mode "resize"
-
-# Start i3bar to display a workspace bar (plus the system information i3status
-# finds out, if available)
-
-# This is Wallpaper
-exec --no-startup-id nitrogen --restore
-
-#This Is night shift
-exec --no-startup-id redshift -O 3000K
-
-#Just for RGB keybOARD
-#exec --no-startup-id xset led named "Scroll Lock"
-
-# Only enable gaps on a workspace when there is at least one container
-smart_gaps on
-smart_borders on
-# Only enable outer gaps when there is exactly one container
-#smart_gaps inverse_outer 
-
-
-# Media Controls
-bindsym $mod+F3 exec --no-startup-id playerctl next
-bindsym $mod+F2 exec --no-startup-id playerctl play-pause
-bindsym $mod+F1 exec --no-startup-id playerctl previous
-
-#gaps pls work
-
-for_window [class="^.*"] border pixel 4
-gaps inner 14
-gaps outer 0
-
-#Screenshot
-bindsym F12 exec --no-startup-id flameshot gui
-
-#touchpad clicking :D
-exec --nostartup-id "xinput set-prop 11 281 1"
-
-#resolution Script
-exec xrandr --newmode "1368x768"   85.25  1368 1440 1576 1784  768 771 781 798 -hsync +vsync
-exec xrandr --addmode LVDS-1 1368x768 
-exec xrandr --addmode VGA-1 1368x768
-exec xrandr --output LVDS-1 --mode 1368x768
-exec xrandr --output VGA-1 --mode 1368x768
-
-#polybar
-#exec "polybar -c /home/linly/.config/polybar/config.ini main"
-exec ~/.config/polybar/launch.sh
-exec "xinput set-prop "SynPS/2 Synaptics TouchPad" 292 1 1 1 1 1 1 1 "
diff --git a/private_dot_config/i3/executable_i3blocks.conf b/private_dot_config/i3/executable_i3blocks.conf
deleted file mode 100644
index c11ae29..0000000
--- a/private_dot_config/i3/executable_i3blocks.conf
+++ /dev/null
@@ -1,189 +0,0 @@
-# align
-# color
-# command
-# full_text
-# instance
-# interval
-# label
-# min_width
-# name
-# separator
-# separator_block_width
-# short_text
-# signal
-# urgent
-# Global properties
-#
-# The top properties below are applied to every block, but can be overridden.
-# Each block command defaults to the script name to avoid boilerplate.
-
-# Global properties
-#
-# The top properties below are applied to every block, but can be overridden.
-# Each block command defaults to the script name to avoid boilerplate.
-command=~/.config/i3/i3blocks/$BLOCK_NAME
-separator_block_width=20
-markup=none
-separator=false
-
-# Find your own networking interfaces by typing
-# 'ip link' or 'ifconfig' in a terminal window.
-# Yours are probably different than mine!
-
-#my ethernet interface is eno1
-#most people is eth0
-[bandwidth]
-instance=enp37s0
-interval=5
-color=#fabd2f
-label= ETH
-
-#my wifi interface is wlp2s0
-[wifi]
-instance=wlp2s0
-interval=10
-color=#b8bb26
-label= WIFI
-separator_block_width=5
-
-[bandwidth]
-instance=wlp2s0
-interval=5
-color=#b8bb26
-
-########################
-separator_block_width=10
-[spacer]
-separator_block_width=10
-full_text=
-color=#b16286
-########################
-
-
-# CPU usage
-#
-# The script may be called with -w and -c switches to specify thresholds,
-# see the script for details.
-[cpu_usage]
-label= CPU
-interval=10
-min_width=CPU: 100.00%
-color=#fb4934
-
-
-########################
-separator_block_width=10
-[spacer]
-separator_block_width=10
-full_text=
-color=#b16286
-########################
-
-
-# Temperature
-#
-# Support multiple chips, though lm-sensors.
-# The script may be called with -w and -c switches to specify thresholds,
-# see the script for details.
-[temperature]
-label= TEMP
-interval=10
-color=#fabd2f
-
-
-########################
-separator_block_width=10
-[spacer]
-separator_block_width=10
-full_text=
-color=#b16286
-########################
-
-
-
-
-# Memory usage
-#
-# The type defaults to "mem" if the instance is not specified.
-[memory]
-label= FREE
-interval=30
-color=#b8bb26
-
-########################
-separator_block_width=10
-[spacer]
-separator_block_width=10
-full_text=
-color=#b16286
-########################
-
-
-
-# Disk usage
-#
-# The directory defaults to $HOME if the instance is not specified.
-# The script may be called with a optional argument to set the alert
-# (defaults to 10 for 10%).
-[disk]
-label= HD /home
-interval=30
-color=#fb4934
-separator_block_width=10
-
-# my root / partition
-[disk]
-label=/
-instance=/dev/sda3
-interval=30
-color=#fb4934
-
-
-########################
-separator_block_width=10
-[spacer]
-separator_block_width=10
-full_text=
-color=#b16286
-########################
-
-
-
-# Battery indicator
-#
-# The battery instance defaults to 0.
-#[battery]
-#label=BATT
-#label= BATT
-#instance=1
-#interval=30
-#color=#fabd2f
-
-
-########################
-separator_block_width=10
-[spacer]
-separator_block_width=10
-full_text=
-color=#b16286
-########################
-
-
-
-[date]
-command=date
-interval=1 
-label=
-color=#b8bb26
-
-#lightred #fb4934
-#red #cc241d
-#green #98971a
-#lightgreen #b8bb26
-#yellow #d79921
-#lightyellow #fabd2f
-#blue #458588
-#purple #b16286
-#aqua #689d68
-#
-
diff --git a/private_dot_config/i3/i3.code-workspace b/private_dot_config/i3/i3.code-workspace
deleted file mode 100644
index 876a149..0000000
--- a/private_dot_config/i3/i3.code-workspace
+++ /dev/null
@@ -1,8 +0,0 @@
-{
-	"folders": [
-		{
-			"path": "."
-		}
-	],
-	"settings": {}
-}
\ No newline at end of file
diff --git a/private_dot_config/i3/i3blocks/executable_bandwidth b/private_dot_config/i3/i3blocks/executable_bandwidth
deleted file mode 100644
index 822aff5..0000000
--- a/private_dot_config/i3/i3blocks/executable_bandwidth
+++ /dev/null
@@ -1,90 +0,0 @@
-#!/bin/bash
-# Copyright (C) 2012 Stefan Breunig <stefan+measure-net-speed@mathphys.fsk.uni-heidelberg.de>
-# Copyright (C) 2014 kaueraal
-# Copyright (C) 2015 Thiago Perrotta <perrotta dot thiago at poli dot ufrj dot br>
-
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-# Use the provided interface, otherwise the device used for the default route.
-if [[ -n $BLOCK_INSTANCE ]]; then
-  INTERFACE=$BLOCK_INSTANCE
-else
-  INTERFACE=$(ip route | awk '/^default/ { print $5 ; exit }')
-fi
-
-# Issue #36 compliant.
-if ! [ -e "/sys/class/net/${INTERFACE}/operstate" ] || ! [ "`cat /sys/class/net/${INTERFACE}/operstate`" = "up" ]
-then
-    echo ""
-    echo ""
-    echo ""
-    exit 0
-fi
-
-# path to store the old results in
-path="/dev/shm/$(basename $0)-${INTERFACE}"
-
-# grabbing data for each adapter.
-read rx < "/sys/class/net/${INTERFACE}/statistics/rx_bytes"
-read tx < "/sys/class/net/${INTERFACE}/statistics/tx_bytes"
-
-# get time
-time=$(date +%s)
-
-# write current data if file does not exist. Do not exit, this will cause
-# problems if this file is sourced instead of executed as another process.
-if ! [[ -f "${path}" ]]; then
-  echo "${time} ${rx} ${tx}" > "${path}"
-  chmod 0666 "${path}"
-fi
-
-# read previous state and update data storage
-read old < "${path}"
-echo "${time} ${rx} ${tx}" > "${path}"
-
-# parse old data and calc time passed
-old=(${old//;/ })
-time_diff=$(( $time - ${old[0]} ))
-
-# sanity check: has a positive amount of time passed
-[[ "${time_diff}" -gt 0 ]] || exit
-
-# calc bytes transferred, and their rate in byte/s
-rx_diff=$(( $rx - ${old[1]} ))
-tx_diff=$(( $tx - ${old[2]} ))
-rx_rate=$(( $rx_diff / $time_diff ))
-tx_rate=$(( $tx_diff / $time_diff ))
-
-# shift by 10 bytes to get KiB/s. If the value is larger than
-# 1024^2 = 1048576, then display MiB/s instead
-
-# incoming
-echo -n "IN "
-rx_kib=$(( $rx_rate >> 10 ))
-if [[ "$rx_rate" -gt 1048576 ]]; then
-  printf '%sM' "`echo "scale=1; $rx_kib / 1024" | bc`"
-else
-  echo -n "${rx_kib}K"
-fi
-
-echo -n " "
-
-# outgoing
-echo -n "OUT "
-tx_kib=$(( $tx_rate >> 10 ))
-if [[ "$tx_rate" -gt 1048576 ]]; then
-  printf '%sM' "`echo "scale=1; $tx_kib / 1024" | bc`"
-else
-  echo -n "${tx_kib}K"
-fi
diff --git a/private_dot_config/i3/i3blocks/executable_battery b/private_dot_config/i3/i3blocks/executable_battery
deleted file mode 100644
index 20b65a9..0000000
--- a/private_dot_config/i3/i3blocks/executable_battery
+++ /dev/null
@@ -1,74 +0,0 @@
-#!/usr/bin/perl
-#
-# Copyright 2014 Pierre Mavro <deimos@deimos.fr>
-# Copyright 2014 Vivien Didelot <vivien@didelot.org>
-#
-# Licensed under the terms of the GNU GPL v3, or any later version.
-#
-# This script is meant to use with i3blocks. It parses the output of the "acpi"
-# command (often provided by a package of the same name) to read the status of
-# the battery, and eventually its remaining time (to full charge or discharge).
-#
-# The color will gradually change for a percentage below 85%, and the urgency
-# (exit code 33) is set if there is less that 5% remaining.
-
-use strict;
-use warnings;
-use utf8;
-
-my $acpi;
-my $status;
-my $percent;
-my $full_text;
-my $short_text;
-my $bat_number = $ENV{BLOCK_INSTANCE} || 0;
-
-# read the first line of the "acpi" command output
-open (ACPI, "acpi -b | grep 'Battery $bat_number' |") or die;
-$acpi = <ACPI>;
-close(ACPI);
-
-# fail on unexpected output
-if ($acpi !~ /: (\w+), (\d+)%/) {
-	die "$acpi\n";
-}
-
-$status = $1;
-$percent = $2;
-$full_text = "$percent%";
-
-if ($status eq 'Discharging') {
-	$full_text .= ' DIS';
-} elsif ($status eq 'Charging') {
-	$full_text .= ' CHR';
-}
-
-$short_text = $full_text;
-
-if ($acpi =~ /(\d\d:\d\d):/) {
-	$full_text .= " ($1)";
-}
-
-# print text
-print "$full_text\n";
-print "$short_text\n";
-
-# consider color and urgent flag only on discharge
-if ($status eq 'Discharging') {
-
-	if ($percent < 20) {
-		print "";
-	} elsif ($percent < 40) {
-		print "";
-	} elsif ($percent < 60) {
-		print "";
-	} elsif ($percent < 85) {
-		print "";
-	}
-
-	if ($percent < 5) {
-		exit(33);
-	}
-}
-
-exit(0);
diff --git a/private_dot_config/i3/i3blocks/executable_cpu_usage b/private_dot_config/i3/i3blocks/executable_cpu_usage
deleted file mode 100644
index 8c3c1f5..0000000
--- a/private_dot_config/i3/i3blocks/executable_cpu_usage
+++ /dev/null
@@ -1,55 +0,0 @@
-#!/usr/bin/perl
-#
-# Copyright 2014 Pierre Mavro <deimos@deimos.fr>
-# Copyright 2014 Vivien Didelot <vivien@didelot.org>
-# Copyright 2014 Andreas Guldstrand <andreas.guldstrand@gmail.com>
-#
-# Licensed under the terms of the GNU GPL v3, or any later version.
-
-use strict;
-use warnings;
-use utf8;
-use Getopt::Long;
-
-# default values
-my $t_warn = 50;
-my $t_crit = 80;
-my $cpu_usage = -1;
-
-sub help {
-    print "Usage: cpu_usage [-w <warning>] [-c <critical>]\n";
-    print "-w <percent>: warning threshold to become yellow\n";
-    print "-c <percent>: critical threshold to become red\n";
-    exit 0;
-}
-
-GetOptions("help|h" => \&help,
-           "w=i"    => \$t_warn,
-           "c=i"    => \$t_crit);
-
-# Get CPU usage
-$ENV{LC_ALL}="en_US"; # if mpstat is not run under en_US locale, things may break, so make sure it is
-open (MPSTAT, 'mpstat 1 1 |') or die;
-while (<MPSTAT>) {
-    if (/^.*\s+(\d+\.\d+)\s+$/) {
-        $cpu_usage = 100 - $1; # 100% - %idle
-        last;
-    }
-}
-close(MPSTAT);
-
-$cpu_usage eq -1 and die 'Can\'t find CPU information';
-
-# Print short_text, full_text
-printf "%.2f%%\n", $cpu_usage;
-printf "%.2f%%\n", $cpu_usage;
-
-# Print color, if needed
-if ($cpu_usage >= $t_crit) {
-    print "#FF0000\n";
-    exit 33;
-} elsif ($cpu_usage >= $t_warn) {
-    print "#FFFC00\n";
-}
-
-exit 0;
diff --git a/private_dot_config/i3/i3blocks/executable_disk b/private_dot_config/i3/i3blocks/executable_disk
deleted file mode 100644
index 5511eac..0000000
--- a/private_dot_config/i3/i3blocks/executable_disk
+++ /dev/null
@@ -1,41 +0,0 @@
-#!/bin/sh
-# Copyright (C) 2014 Julien Bonjean <julien@bonjean.info>
-
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-DIR="${BLOCK_INSTANCE:-$HOME}"
-ALERT_LOW="${1:-10}" # color will turn red under this value (default: 10%)
-
-df -h -P -l "$DIR" | awk -v alert_low=$ALERT_LOW '
-/\/.*/ {
-	# full text
-	print $4
-
-	# short text
-	print $4
-
-	use=$5
-
-	# no need to continue parsing
-	exit 0
-}
-
-END {
-	gsub(/%$/,"",use)
-	if (100 - use < alert_low) {
-		# color
-		print "#FF0000"
-	}
-}
-'
diff --git a/private_dot_config/i3/i3blocks/executable_iface b/private_dot_config/i3/i3blocks/executable_iface
deleted file mode 100644
index 7014979..0000000
--- a/private_dot_config/i3/i3blocks/executable_iface
+++ /dev/null
@@ -1,61 +0,0 @@
-#!/bin/bash
-# Copyright (C) 2014 Julien Bonjean <julien@bonjean.info>
-# Copyright (C) 2014 Alexander Keller <github@nycroth.com>
-
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-#------------------------------------------------------------------------
-
-# Use the provided interface, otherwise the device used for the default route.
-if [[ -n $BLOCK_INSTANCE ]]; then
-  IF=$BLOCK_INSTANCE
-else
-  IF=$(ip route | awk '/^default/ { print $5 ; exit }')
-fi
-
-#------------------------------------------------------------------------
-
-# As per #36 -- It is transparent: e.g. if the machine has no battery or wireless
-# connection (think desktop), the corresponding block should not be displayed.
-[[ ! -d /sys/class/net/${IF} ]] && exit
-
-#------------------------------------------------------------------------
-
-if [[ "$(cat /sys/class/net/$IF/operstate)" = 'down' ]]; then
-  echo down # full text
-  echo down # short text
-  echo \#FF0000 # color
-  exit
-fi
-
-case $1 in
-  -4)
-    AF=inet ;;
-  -6)
-    AF=inet6 ;;
-  *)
-    AF=inet6? ;;
-esac
-
-# if no interface is found, use the first device with a global scope
-IPADDR=$(ip addr show $IF | perl -n -e "/$AF ([^\/]+).* scope global/ && print \$1 and exit")
-
-case $BLOCK_BUTTON in
-  3) echo -n "$IPADDR" | xclip -q -se c ;;
-esac
-
-#------------------------------------------------------------------------
-
-echo "$IPADDR" # full text
-echo "$IPADDR" # short text
diff --git a/private_dot_config/i3/i3blocks/executable_keyindicator b/private_dot_config/i3/i3blocks/executable_keyindicator
deleted file mode 100644
index 9c21505..0000000
--- a/private_dot_config/i3/i3blocks/executable_keyindicator
+++ /dev/null
@@ -1,70 +0,0 @@
-#!/usr/bin/perl
-#
-# Copyright 2014 Marcelo Cerri <mhcerri at gmail dot com>
-#
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-use strict;
-use warnings;
-use utf8;
-use Getopt::Long;
-use File::Basename;
-
-# Default values
-my $indicator = $ENV{BLOCK_INSTANCE} || "CAPS";
-my $color_on  = "#00FF00";
-my $color_off = "#222222";
-
-sub help {
-    my $program = basename($0);
-    printf "Usage: %s [-c <color on>] [-C <color off>]\n", $program;
-    printf "  -c <color on>: hex color to use when indicator is on\n";
-    printf "  -C <color off>: hex color to use when indicator is off\n";
-    printf "\n";
-    printf "Note: environment variable \$BLOCK_INSTANCE should be one of:\n";
-    printf "  CAPS, NUM (default is CAPS).\n";
-    exit 0;
-}
-
-Getopt::Long::config qw(no_ignore_case);
-GetOptions("help|h" => \&help,
-           "c=s"    => \$color_on,
-           "C=s"    => \$color_off) or exit 1;
-
-# Key mapping
-my %indicators = (
-    CAPS => 0x00000001,
-    NUM  => 0x00000002,
-);
-
-# Retrieve key flags
-my $mask = 0;
-open(XSET, "xset -q |") or die;
-while (<XSET>) {
-    if (/LED mask:\s*([0-9]+)/) {
-        $mask = $1;
-        last;
-    }
-}
-close(XSET);
-
-# Output
-printf "%s\n", $indicator;
-printf "%s\n", $indicator;
-if (($indicators{$indicator} || 0) & $mask) {
-    printf "%s\n", $color_on;
-} else {
-    printf "%s\n", $color_off;
-}
-exit 0
diff --git a/private_dot_config/i3/i3blocks/executable_load_average b/private_dot_config/i3/i3blocks/executable_load_average
deleted file mode 100644
index 37a5c71..0000000
--- a/private_dot_config/i3/i3blocks/executable_load_average
+++ /dev/null
@@ -1,34 +0,0 @@
-#!/bin/sh
-# Copyright (C) 2014 Julien Bonjean <julien@bonjean.info>
-
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-load="$(cut -d ' ' -f1 /proc/loadavg)"
-cpus="$(nproc)"
-
-# full text
-echo "$load"
-
-# short text
-echo "$load"
-
-# color if load is too high
-awk -v cpus=$cpus -v cpuload=$load '
-    BEGIN {
-        if (cpus <= cpuload) {
-            print "#FF0000";
-            exit 33;
-        }
-    }
-'
diff --git a/private_dot_config/i3/i3blocks/executable_mediaplayer b/private_dot_config/i3/i3blocks/executable_mediaplayer
deleted file mode 100644
index b3d3ecb..0000000
--- a/private_dot_config/i3/i3blocks/executable_mediaplayer
+++ /dev/null
@@ -1,76 +0,0 @@
-#!/usr/bin/perl
-# Copyright (C) 2014 Tony Crisci <tony@dubstepdish.com>
-
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-# Requires playerctl binary to be in your path (except cmus)
-# See: https://github.com/acrisci/playerctl
-
-# Set instance=NAME in the i3blocks configuration to specify a music player
-# (playerctl will attempt to connect to org.mpris.MediaPlayer2.[NAME] on your
-# DBus session).
-
-use Env qw(BLOCK_INSTANCE);
-
-my @metadata = ();
-my $player_arg = "";
-
-if ($BLOCK_INSTANCE) {
-    $player_arg = "--player='$BLOCK_INSTANCE'";
-}
-
-if ($ENV{'BLOCK_BUTTON'} == 1) {
-    system("playerctl $player_arg previous");
-} elsif ($ENV{'BLOCK_BUTTON'} == 2) {
-    system("playerctl $player_arg play-pause");
-} elsif ($ENV{'BLOCK_BUTTON'} == 3) {
-    system("playerctl $player_arg next");
-}
-
-if ($player_arg eq '' or $player_arg =~ /cmus$/) {
-    # try cmus first
-    my @cmus = split /^/, qx(cmus-remote -Q);
-    if ($? == 0) {
-        foreach my $line (@cmus) {
-            my @data = split /\s/, $line;
-            if (shift @data eq 'tag') {
-                my $key = shift @data;
-                my $value = join ' ', @data;
-
-                @metadata[0] = $value if $key eq 'artist';
-                @metadata[1] = $value if $key eq 'title';
-            }
-        }
-
-        if (@metadata) {
-            # metadata found so we are done
-            print(join ' - ', @metadata);
-            exit 0;
-        }
-    }
-
-    # if cmus was given, we are done
-    exit 0 unless $player_arg eq '';
-}
-
-my $artist = qx(playerctl $player_arg metadata artist);
-# exit status will be nonzero when playerctl cannot find your player
-exit(0) if $?;
-push(@metadata, $artist) if $artist;
-
-my $title = qx(playerctl $player_arg metadata title);
-exit(0) if $?;
-push(@metadata, $title) if $title;
-
-print(join(" - ", @metadata)) if @metadata;
diff --git a/private_dot_config/i3/i3blocks/executable_memory b/private_dot_config/i3/i3blocks/executable_memory
deleted file mode 100644
index e28af4e..0000000
--- a/private_dot_config/i3/i3blocks/executable_memory
+++ /dev/null
@@ -1,49 +0,0 @@
-#!/bin/sh
-# Copyright (C) 2014 Julien Bonjean <julien@bonjean.info>
-
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-TYPE="${BLOCK_INSTANCE:-mem}"
-
-awk -v type=$TYPE '
-/^MemTotal:/ {
-	mem_total=$2
-}
-/^MemFree:/ {
-	mem_free=$2
-}
-/^Buffers:/ {
-	mem_free+=$2
-}
-/^Cached:/ {
-	mem_free+=$2
-}
-/^SwapTotal:/ {
-	swap_total=$2
-}
-/^SwapFree:/ {
-	swap_free=$2
-}
-END {
-	# full text
-	if (type == "swap")
-		printf("%.1fG\n", (swap_total-swap_free)/1024/1024)
-	else
-		printf("%.1fG\n", mem_free/1024/1024)
-
-	# TODO: short text
-
-	# TODO: color (if less than X%)
-}
-' /proc/meminfo
diff --git a/private_dot_config/i3/i3blocks/executable_openvpn b/private_dot_config/i3/i3blocks/executable_openvpn
deleted file mode 100644
index 02aaba4..0000000
--- a/private_dot_config/i3/i3blocks/executable_openvpn
+++ /dev/null
@@ -1,149 +0,0 @@
-#!/usr/bin/perl
-# Made by Pierre Mavro/Deimosfr <deimos@deimos.fr>
-# Licensed under the terms of the GNU GPL v3, or any later version.
-# Version: 0.2
-
-# Usage:
-# 1. The configuration name of OpenVPN should be familiar for you (home,work...)
-# 2. The device name in your configuration file should be fully named (tun0,tap1...not only tun or tap)
-# 3. When you launch one or multiple OpenVPN connexion, be sure the PID file is written in the correct folder (ex: --writepid /run/openvpn/home.pid)
-
-use strict;
-use warnings;
-use utf8;
-use Getopt::Long;
-
-my $openvpn_enabled='/dev/shm/openvpn_i3blocks_enabled';
-my $openvpn_disabled='/dev/shm/openvpn_i3blocks_disabled';
-
-# Print output
-sub print_output {
-    my $ref_pid_files = shift;
-    my @pid_files = @$ref_pid_files;
-    my $change=0;
-
-    # Total pid files
-    my $total_pid = @pid_files;
-    if ($total_pid == 0) {
-        print "VPN: down\n"x2;
-        # Delete OpenVPN i3blocks temp files
-        if (-f $openvpn_enabled) {
-            unlink $openvpn_enabled or die "Can't delete $openvpn_enabled\n";
-            # Colorize if VPN has just went down
-            print '#FF0000\n';
-        }
-        unless (-f $openvpn_disabled) {
-            open(my $shm, '>', $openvpn_disabled) or die "Can't write $openvpn_disabled\n";
-        }
-        exit(0);
-    }
-
-    # Check if interface device is present
-    my $vpn_found=0;
-    my $pid;
-    my $cmd_line;
-    my @config_name;
-    my @config_path;
-    my $interface;
-    my $current_config_path;
-    my $current_config_name;
-    foreach (@pid_files) {
-        # Get current PID
-        $pid=0;
-        open(PID, '<', $_);
-        while(<PID>) {
-            chomp $_;
-            $pid = $_;
-        }
-        close(PID);
-        # Check if PID has been found
-        if ($pid ==0) {
-            print "Can't get PID $_: $!\n";
-        }
-
-        # Check if PID is still alive
-        $cmd_line='/proc/'.$pid.'/cmdline';
-        if (-f $cmd_line) {
-            # Get config name
-            open(CMD_LINE, '<', $cmd_line);
-            while(<CMD_LINE>) {
-                chomp $_;
-                if ($_ =~ /--config\s*(.*\.conf)/) {
-                    # Get interface from config file
-                    $current_config_path = $1;
-                    # Remove unwanted escape chars
-                    $current_config_path =~ s/\x{00}//g;
-                    $interface = 'null';
-                    # Get configuration name
-                    if ($current_config_path =~ /(\w+).conf/) {
-                        $current_config_name=$1;
-                    } else {
-                        $current_config_name='unknow';
-                    }
-                    # Get OpenVPN interface device name
-                    open(CONFIG, '<', $current_config_path) or die "Can't read config file '$current_config_path': $!\n";
-                    while(<CONFIG>) {
-                        chomp $_;
-                        if ($_ =~ /dev\s+(\w+)/) {
-                            $interface=$1;
-                            last;
-                        }
-                    }
-                    close(CONFIG);
-                    # check if interface exist
-                    unless ($interface eq 'null') {
-                        if (-d "/sys/class/net/$interface") {
-                            push @config_name, $current_config_name;
-                            $vpn_found=1;
-                            # Write enabled file
-                            unless (-f $openvpn_enabled) {
-                                open(my $shm, '>', $openvpn_enabled) or die "Can't write $openvpn_enabled\n";
-                                $change=1;
-                            }
-                        }
-                    }
-                }
-            }
-            close(CMD_LINE);
-        }
-    }
-
-    # Check if PID found
-    my $names;
-    my $short_status;
-    if ($vpn_found == 1) {
-        $names = join('/', @config_name);
-        $short_status='up';
-    } else {
-        $short_status='down';
-        $names = $short_status;
-    }
-
-    print "VPN: $names\n";
-    print "VPN: $short_status\n";
-
-    # Print color if there were changes
-    print "#00FF00\n" if ($change == 1);
-
-    exit(0);
-}
-
-sub check_opts {
-    # Vars
-    my @pid_file=glob '/run/openvpn/*.pid';
-
-    # Set options
-    GetOptions( "help|h" => \&help,
-        "p=s"    => \@pid_file);
-
-    print_output(\@pid_file);
-}
-
-sub help {
-    print "Usage: openvpn [-d pid folder files]\n";
-    print "-d : pid folder files (default /run/openvpn/*.pid)\n";
-    print "Note: devices in configuration file should be named with their number (ex: tun0, tap1)\n";
-    exit(1);
-}
-
-&check_opts;
diff --git a/private_dot_config/i3/i3blocks/executable_temperature b/private_dot_config/i3/i3blocks/executable_temperature
deleted file mode 100644
index ad745c3..0000000
--- a/private_dot_config/i3/i3blocks/executable_temperature
+++ /dev/null
@@ -1,69 +0,0 @@
-#!/usr/bin/perl
-# Copyright 2014 Pierre Mavro <deimos@deimos.fr>
-# Copyright 2014 Vivien Didelot <vivien@didelot.org>
-# Copyright 2014 Andreas Guldstrand <andreas.guldstrand@gmail.com>
-# Copyright 2014 Benjamin Chretien <chretien at lirmm dot fr>
-
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-use strict;
-use warnings;
-use utf8;
-use Getopt::Long;
-
-binmode(STDOUT, ":utf8");
-
-# default values
-my $t_warn = 70;
-my $t_crit = 90;
-my $chip = "";
-my $temperature = -9999;
-
-sub help {
-    print "Usage: temperature [-w <warning>] [-c <critical>] [--chip <chip>]\n";
-    print "-w <percent>: warning threshold to become yellow\n";
-    print "-c <percent>: critical threshold to become red\n";
-    print "--chip <chip>: sensor chip\n";
-    exit 0;
-}
-
-GetOptions("help|h" => \&help,
-           "w=i"    => \$t_warn,
-           "c=i"    => \$t_crit,
-           "chip=s" => \$chip);
-
-# Get chip temperature
-open (SENSORS, "sensors -u $chip |") or die;
-while (<SENSORS>) {
-    if (/^\s+temp1_input:\s+[\+]*([\-]*\d+\.\d)/) {
-        $temperature = $1;
-        last;
-    }
-}
-close(SENSORS);
-
-$temperature eq -9999 and die 'Cannot find temperature';
-
-# Print short_text, full_text
-print "$temperature°C\n" x2;
-
-# Print color, if needed
-if ($temperature >= $t_crit) {
-    print "#FF0000\n";
-    exit 33;
-} elsif ($temperature >= $t_warn) {
-    print "#FFFC00\n";
-}
-
-exit 0;
diff --git a/private_dot_config/i3/i3blocks/executable_volume b/private_dot_config/i3/i3blocks/executable_volume
deleted file mode 100644
index a55db88..0000000
--- a/private_dot_config/i3/i3blocks/executable_volume
+++ /dev/null
@@ -1,70 +0,0 @@
-#!/bin/bash
-# Copyright (C) 2014 Julien Bonjean <julien@bonjean.info>
-# Copyright (C) 2014 Alexander Keller <github@nycroth.com>
-
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-#------------------------------------------------------------------------
-
-# The second parameter overrides the mixer selection
-# For PulseAudio users, use "pulse"
-# For Jack/Jack2 users, use "jackplug"
-# For ALSA users, you may use "default" for your primary card
-# or you may use hw:# where # is the number of the card desired
-MIXER="default"
-[ -n "$(lsmod | grep pulse)" ] && MIXER="pulse"
-[ -n "$(lsmod | grep jack)" ] && MIXER="jackplug"
-MIXER="${2:-$MIXER}"
-
-# The instance option sets the control to report and configure
-# This defaults to the first control of your selected mixer
-# For a list of the available, use `amixer -D $Your_Mixer scontrols`
-SCONTROL="${BLOCK_INSTANCE:-$(amixer -D $MIXER scontrols |
-                  sed -n "s/Simple mixer control '\([A-Za-z ]*\)',0/\1/p" |
-                  head -n1
-                )}"
-
-# The first parameter sets the step to change the volume by (and units to display)
-# This may be in in % or dB (eg. 5% or 3dB)
-STEP="${1:-5%}"
-
-#------------------------------------------------------------------------
-
-capability() { # Return "Capture" if the device is a capture device
-  amixer -D $MIXER get $SCONTROL |
-    sed -n "s/  Capabilities:.*cvolume.*/Capture/p"
-}
-
-volume() {
-  amixer -D $MIXER get $SCONTROL $(capability)
-}
-
-format() {
-  perl_filter='if (/.*\[(\d+%)\] (\[(-?\d+.\d+dB)\] )?\[(on|off)\]/)'
-  perl_filter+='{CORE::say $4 eq "off" ? "MUTE" : "'
-  # If dB was selected, print that instead
-  perl_filter+=$([[ $STEP = *dB ]] && echo '$3' || echo '$1')
-  perl_filter+='"; exit}'
-  perl -ne "$perl_filter"
-}
-
-#------------------------------------------------------------------------
-
-case $BLOCK_BUTTON in
-  3) amixer -q -D $MIXER sset $SCONTROL $(capability) toggle ;;  # right click, mute/unmute
-  4) amixer -q -D $MIXER sset $SCONTROL $(capability) ${STEP}+ unmute ;; # scroll up, increase
-  5) amixer -q -D $MIXER sset $SCONTROL $(capability) ${STEP}- unmute ;; # scroll down, decrease
-esac
-
-volume | format
diff --git a/private_dot_config/i3/i3blocks/executable_wifi b/private_dot_config/i3/i3blocks/executable_wifi
deleted file mode 100644
index 1d2ae1d..0000000
--- a/private_dot_config/i3/i3blocks/executable_wifi
+++ /dev/null
@@ -1,46 +0,0 @@
-#!/bin/bash
-# Copyright (C) 2014 Alexander Keller <github@nycroth.com>
-
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-#------------------------------------------------------------------------
-
-INTERFACE="${BLOCK_INSTANCE:-wlan0}"
-
-#------------------------------------------------------------------------
-
-# As per #36 -- It is transparent: e.g. if the machine has no battery or wireless
-# connection (think desktop), the corresponding block should not be displayed.
-[[ ! -d /sys/class/net/${INTERFACE}/wireless ]] ||
-    [[ "$(cat /sys/class/net/$INTERFACE/operstate)" = 'down' ]] && exit
-
-#------------------------------------------------------------------------
-
-QUALITY=$(grep $INTERFACE /proc/net/wireless | awk '{ print int($3 * 100 / 70) }')
-
-#------------------------------------------------------------------------
-
-echo $QUALITY% # full text
-echo $QUALITY% # short text
-
-# color
-if [[ $QUALITY -ge 80 ]]; then
-    echo ""
-elif [[ $QUALITY -lt 80 ]]; then
-    echo ""
-elif [[ $QUALITY -lt 60 ]]; then
-    echo ""
-elif [[ $QUALITY -lt 40 ]]; then
-    echo ""
-fi
diff --git a/private_dot_config/i3/i3status/config b/private_dot_config/i3/i3status/config
deleted file mode 100644
index e7a6022..0000000
--- a/private_dot_config/i3/i3status/config
+++ /dev/null
@@ -1,64 +0,0 @@
-# i3status configuration file.
-# see "man i3status" for documentation.
-
-# It is important that this file is edited as UTF-8.
-# The following line should contain a sharp s:
-# ß
-# If the above line is not correctly displayed, fix your editor first!
-
-general {
-        colors = true
-        interval = 5
-}
-
-order += "wireless _first_"
-order += "ethernet _first_"
-order += "ipv6"
-order += "battery all"
-order += "disk /"
-order += "disk /home"
-order += "load"
-order += "memory"
-order += "tztime local"
-
-wireless _first_ {
-        format_up = "W: (%quality at %essid) %ip"
-        format_down = "W: down"
-}
-
-ethernet _first_ {
-        format_up = "E: %ip (%speed)"
-        format_down = "E: down"
-}
-
-battery all {
-        format = "%status %percentage %remaining"
-        format_down = ""
-}
-
-disk "/" {
-        format = "/:%avail"
-}
-
-disk "/home" {
-        format = "h:%avail"
-}
-
-load {
-        format = "%1min"
-}
-
-cpu_temperature 0 {
-        format = "C0: %degrees°C"
-        max_threshold = 75
-}
-
-memory {
-        format = "%used | %available"
-        threshold_degraded = "1G"
-        format_degraded = "MEMORY < %available"
-}
-
-tztime local {
-        format = "%Y-%m-%d %H:%M:%S"
-}